 | A standard Elsie Fusible link meets all requirements
under the UL33 standard. |
| The SAL can be installed in most settings where regular
scheduled testing is required. |
| The re-settable SAL makes scheduled testing easy and
non-destructive. |
| Operation occurs immediately regardless of activation
method. |
| The SAL unit is 100% reusable after electrical or manual
testing. |
| The SAL allows for control by smoke detectors for
immediate release or remote operation from a control center. |
| Manual operation is achieved by depressing the solenoid
plunger which engages the fusible link. This is also how the link is reset
after activation. |
| No tools are required to reset the SAL after activation. |
| Fail-safe operation in a fire with an Elsie heat
activated, UL listed fusible link eliminates the need for an auxiliary battery
back-up in case of power failure. |
| The SAL can be loaded equally in all directions. The
unique design of the SAL allows for a maximum load of 30 lbs. to be applied in
any direction in the plane perpendicular to the plunger.( See Model
Specification Guide). |
| The re-settable SAL unit can be installed in most
applications where a “single use” fusible link would be installed. |
| The SAL can be used as an alternate or primary fire/heat
detector. |
| No continuous power requirements when link is in the
“armed” position. |
| Electric housing box is compatible with all standard
electrical fittings. |
| The SAL can be built to fit many different applications. |
